Select Language
Heat output 1044 kW/h (900000 kcal/h), supplied air temperature up to 135°C — a reliable solution for graindrying complexes and large industrial facilities.
| Parameter | Value |
|---|---|
| Model | CHG-900 |
| Heat Generator Output (kcal/h) | 900000 kcal/h |
| Heat Generator Output (kW) | 1044 kW/h |
| Maximum Outlet Air Temperature | 135 °C |
| Fuel Type | Solid Fuel (small fraction) |
| Parameter | Value |
|---|---|
| Length | 2700 mm |
| Maintenance Zone Length | 2200 mm |
| Width | 1800 mm |
| Width with Fuel Hopper | 2500 |
| Height | 2900 |
| Auger Maintenance Zone | 1500 mm |
| Axial Fan Cylinder Length | 800 mm |
| Chimney Size | 400х400 mm |
| Heated Air Outlet Diameter | 800х500 mm |
| Air inlet diameter | 1100 mm |
| Parameter | Value |
|---|---|
| Operating Voltage | 380 V |
| Total power consumption | 21.5 kW |
| Airflow Capacity | 50000 m³/h |
| Fuel Hopper Capacity | 300 kg |
The heat generator CHG-900 provides a thermal output of 900000 kcal/h (1044 kW/h), making it the optimal choice for grain drying complexes, large warehouse spaces, and agricultural production facilities with high heating requirements. An airflow capacity of 50000 m³/h evenly distributes the heated air throughout the serviced area, eliminating cold zones and ensuring a stable drying process.
The maximum supplied air temperature reaches 135°C, which makes it possible to precisely control the drying modes of grain and other crops even in low ambient temperatures. The fuel hopper with a capacity of 300 kg ensures long autonomous operation without the need for frequent maintenance — a critically important factor during the peak of the harvest season.
The heat generator design is intended for operation in the harsh conditions of agricultural production: a dusty environment, load fluctuations, and round-the-clock operation. The balance between the declared thermal output and the unit’s durability is achieved through a well-designed heat exchange circuit configuration and an effective distribution of thermal loads across the tube system.
The key design solution ensuring the service life of the heat generator CHG-900 is the use of heat-resistant AISI 310 stainless steel in the combustion chamber zone and heat exchange surfaces. This material retains structural integrity at temperatures significantly exceeding operating levels, preventing deformation and burn-through even during prolonged operation at maximum modes with a heat output of 1044 kW/h.
The tubular heat exchanger is designed to ensure maximum heat transfer to the air flow 50000 m³/h with minimal hydraulic resistance. The geometry and tube pitch are selected based on the actual combustion modes of solid fuel: this allows heat to be removed evenly along the entire length of the heat exchanger, preventing local overheating and extending the service life of the unit.
The hopper with a capacity of 300 kg and the auger fuel feeding system are balanced with a heat output of 900000 kcal/h so that combustion remains stable and complete throughout the entire operating cycle. The result is a stable outlet temperature of up to 135°C without sudden spikes, minimal output of unburned residues, and predictable fuel consumption, which is especially important when planning logistics at large grain drying complexes.