Select Language
Drying capacity up to 3 t/h with moisture reduction from 25% to 15%. Heat generator(-s) power — 400000 kcal/h. Full control over the quality and processing time of your grain.
| Parameter | Value |
|---|---|
| Model | PGD-2105.400 |
| Moisture reduction from 25% to 15% (Corn) | 3 T/Hour |
| Auger capacity | 30 T/Hour |
| Total Power of Heatgenerator(-s) | 400000 kcal/h |
| Number of grain columns | 5 |
| Number of modules | 1 |
| Drying Mode | Heating and Cooling |
| Cooling Fan Amount | 1 |
| Parameter | Value |
|---|---|
| Heat generator model(s) | CHG-400 |
| Heat generator air flow | 24000 m³/hour |
| Heat generator(-s) total power (out) | 400000 kcal/h |
| Heated air maximum temperature | 135 °C |
| Working Voltage | 380 V |
| Power Consumption | 13.5 kW |
| Fuel Bunker Capacity | 300 kg |
| Parameter | Value |
|---|---|
| Cooling Motor Power | 15 kW |
| Cooling Fan Speed | 1450 rpm |
| Cooling Fan Diameter | 1000 mm |
| Parameter | Value |
|---|---|
| Length | 5340 mm |
| Width | 2450 mm |
| Height | 4120 mm |
| Grain column length | 362 mm |
| Grain column width | 600 mm |
| Parameter | Value |
|---|---|
| Upper loading auger motor power | 5.5 kW |
| Upper loading auger capacity | 30 T/Hour |
| Lower unloading auger motor power | 5.5 kW |
| Lower unloading auger capacity | 30 T/Hour |
| Parameter | Value |
|---|---|
| Roller motor-reducer power | 2.2 kW |
| Roller capacity | 30 T/Hour |
| Dryer capacity | 6700 kg |
| Moisture reduction from 25% to 15% (Corn) | 3 T/Hour |
| Parameter | Value |
|---|---|
| Total power consumption | 41.7 kW |
| Input voltage | 380 V |
| Power supply phases | 3 phases |
| Production time (days) | 30 |
| Warranty service | 2 Years |
Graindryer PGD-2105.400 is a complete drying solution that allows a farm to establish its own grain post-harvest processing cycle. You no longer depend on other people’s dryers, queues, or other people’s schedules — and you begin to work at your own pace, controlling every stage from receiving to shipment. This is a rational start that provides full autonomy and freedom of action from day one.
The system is equipped with heat generator(-s) CHG-400 with a maximum heated air temperature of up to 135 °C, which ensures stable and uniform heating of the grain mass across the entire area of the grain columns. The heat generator(-s) operate on solid fuel, which, in the conditions of a constantly growing energy market, becomes a decisive economic advantage: the cost of drying is many times lower than when using propane-butane or natural gas. The difference is felt from the first season and directly affects the profitability of the entire harvest campaign.
The drying chamber capacity is 6700 kg, and the heat generator(s) air flow reaches 24000 m³/h — these parameters ensure intensive and uniform heat exchange, reducing the time of each drying cycle. At the same time, the fuel bunker with a capacity of 300 kg allows for long uninterrupted operation without frequent refilling, which is critically important during peak harvest periods.
The graindryer PGD-2105.400 is designed on a modular principle — this means that you are not purchasing equipment “for today,” but a platform that grows together with your enterprise. As production volumes increase, additional sections are added to the dryer, the height of the grain columns is extended — all without dismantling the existing system. You do not replace the dryer; you develop it.
The key element of this strategy is heat generator(-s) CHG-400. However, this model is not tied to this model; at the start, you can also install a more powerful heat generator with reserve capacity. When the time comes to expand, the heat generator will already be ready for the increased load, and you will not have to replace it or buy an additional one. This is a deliberate engineering approach: the system is designed for scalability from the outset.
This approach is an investment logic, not just a technical feature. The system is designed from the outset so that each next expansion step requires minimal costs and simple installation. You start with the optimal format for your current volumes and budget, and then you scale the infrastructure step by step, keeping all previously installed equipment. Combined with the many-times lower cost of solid fuel compared to gas, this makes PGD-2105.400 one of the most economically sound solutions for entering your own grain drying.