Energy-efficient solution for drying and stabilizing grain with an integrated cooling zone
General
Parameter
Value
Model
PGD-3109.1250
Moisture reduction from 25% to 15% (Corn)
9.5 T/Hour
Auger capacity
40 T/Hour
Total Power of Heatgenerator(-s)
1250000 kcal/h
Number of grain columns
9
Number of modules
1
Drying Mode
Heating and Cooling
Cooling Fan Amount
1
Heat Generator Specifications
Parameter
Value
Heat generator model(s)
CHG-1250
Heat generator air flow
80000 m³/hour
Heat generator(-s) total power (out)
1250000 kcal/h
Heated air maximum temperature
135 °C
Working Voltage
380 V
Power Consumption
36 kW
Fuel Bunker Capacity
550 kg
Cooling Fan Specs
Parameter
Value
Cooling Motor Power
15 kW
Cooling Fan Speed
1450 rpm
Cooling Fan Diameter
1000 mm
Dimensions
Parameter
Value
Length
7800 mm
Width
2450 mm
Height
5800 mm
Grain column length
362 mm
Grain column width
600 mm
Grain Augers
Parameter
Value
Upper loading auger motor power
5.5 kW
Upper loading auger capacity
40 T/Hour
Lower unloading auger motor power
5.5 kW
Lower unloading auger capacity
40 T/Hour
Rollers and Dryer Performance
Parameter
Value
Roller motor-reducer power
2.2 kW
Roller capacity
40 T/Hour
Dryer capacity
18100 kg
Moisture reduction from 25% to 15% (Corn)
9.5 T/Hour
Additional Information
Parameter
Value
Total power consumption
64.2 kW
Input voltage
380 V
Power supply phases
3 phases
Production time (days)
40
Warranty service
2 Years
Reliable solid-fuel grain dryer for efficient operation
A solid-fuel grain dryer with cooling combines the stages of heating and subsequent grain stabilization into a single technological cycle. This configuration helps reduce grain drying costs, improve processing quality, and simplify equipment operation.
Heated air is supplied from an external solid-fuel heat generator through a heat exchanger, ensuring uniform grain drying without direct contact with combustion products. This is especially important for preserving crop quality and maintaining stable moisture levels.
The built-in cooling zone makes it possible to cool the grain directly in the lower module of the grain dryer. As a result, the product leaves the dryer more stable for storage, and the need for a separate external cooler is eliminated.
